Changes between Version 1 and Version 2 of TracWorkflow


Ignore:
Timestamp:
11/17/17 12:56:09 (7 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • TracWorkflow

    v1 v2  
    1 = The Trac Ticket Workflow System =
     1= The Trac Ticket Workflow System
     2
     3[[PageOutline(2-5,Contents,pullout)]]
    24[[TracGuideToc]]
    3 
    4 The Trac issue database provides a configurable workflow.
    5 
    6 == The Default Ticket Workflow ==
    7 === Environments upgraded from 0.10 ===
    8 When you run `trac-admin <env> upgrade`, your `trac.ini` will be modified to include a `[ticket-workflow]` section.
    9 The workflow configured in this case is the original workflow, so that ticket actions will behave like they did in 0.10.
    10 
    11 Graphically, that looks like this:
    12 
    13 [[Image(htdocs:../common/guide/original-workflow.png)]]
    14 
    15 There are some significant "warts" in this; such as accepting a ticket sets it to 'assigned' state, and assigning a ticket sets it to 'new' state.  Perfectly obvious, right?
    16 So you will probably want to migrate to "basic" workflow; `contrib/workflow/migrate_original_to_basic.py` may be helpful.
    17 
    18 === Environments created with 0.11 ===
    19 When a new environment is created, a default workflow is configured in your trac.ini.  This workflow is the basic workflow (described in `basic-workflow.ini`), which is somewhat different from the workflow of the 0.10 releases.
    20 
    21 Graphically, it looks like this:
    22 
    23 [[Image(htdocs:../common/guide/basic-workflow.png)]]
    24 
    25 == Additional Ticket Workflows ==
    26 
    27 There are several example workflows provided in the Trac source tree; look in `contrib/workflow` for `.ini` config sections.  One of those may be a good match for what you want. They can be pasted into the `[ticket-workflow]` section of your `trac.ini` file.
    28 
    29 == Basic Ticket Workflow Customization ==
     5The Trac ticket system provides a configurable workflow.
     6
     7== The Default Ticket Workflow
     8
     9When a new environment is created, a default workflow is configured in your trac.ini. This workflow is the basic workflow, such as specified in [trac:source:/trunk/trac/ticket/workflows/basic-workflow.ini basic-workflow.ini]:
     10
     11{{{#!Workflow width=700 height=300
     12leave = * -> *
     13leave.operations = leave_status
     14leave.default = 1
     15
     16create = <none> -> new
     17create.default = 1
     18
     19create_and_assign = <none> -> assigned
     20create_and_assign.label = assign
     21create_and_assign.permissions = TICKET_MODIFY
     22create_and_assign.operations = may_set_owner
     23
     24accept = new,assigned,accepted,reopened -> accepted
     25accept.permissions = TICKET_MODIFY
     26accept.operations = set_owner_to_self
     27
     28resolve = new,assigned,accepted,reopened -> closed
     29resolve.permissions = TICKET_MODIFY
     30resolve.operations = set_resolution
     31
     32reassign = new,assigned,accepted,reopened -> assigned
     33reassign.permissions = TICKET_MODIFY
     34reassign.operations = set_owner
     35
     36reopen = closed -> reopened
     37reopen.permissions = TICKET_CREATE
     38reopen.operations = del_resolution
     39}}}
     40
     41== Additional Ticket Workflows
     42
     43There are example workflows provided in the Trac source tree, see [trac:source:trunk/contrib/workflow contrib/workflow] for `.ini` config sections. One of those may be a good match for what you want. They can be pasted into the `[ticket-workflow]` section of your `trac.ini` file. However, if you have existing tickets then there may be issues if those tickets have states that are not in the new workflow.
     44
     45Here are some [trac:WorkFlow/Examples diagrams] of the above examples.
     46
     47== Basic Ticket Workflow Customization
     48
     49'''Note''': Ticket "statuses" or "states" are not separately defined. The states a ticket can be in are automatically generated by the transitions defined in a workflow. Therefore, creating a new ticket state simply requires defining a state transition in the workflow that starts or ends with that state.
    3050
    3151Create a `[ticket-workflow]` section in `trac.ini`.
    3252Within this section, each entry is an action that may be taken on a ticket.
    3353For example, consider the `accept` action from `simple-workflow.ini`:
    34 {{{
     54
     55{{{#!ini
    3556accept = new,accepted -> accepted
    3657accept.permissions = TICKET_MODIFY
    3758accept.operations = set_owner_to_self
    3859}}}
     60
    3961The first line in this example defines the `accept` action, along with the states the action is valid in (`new` and `accepted`), and the new state of the ticket when the action is taken (`accepted`).
    4062The `accept.permissions` line specifies what permissions the user must have to use this action.
     
    4264
    4365The available operations are:
    44  - del_owner -- Clear the owner field.
    45  - set_owner -- Sets the owner to the selected or entered owner.
    46    - ''actionname''`.set_owner` may optionally be set to a comma delimited list or a single value.
    47  - set_owner_to_self -- Sets the owner to the logged in user.
    48  - del_resolution -- Clears the resolution field
    49  - set_resolution -- Sets the resolution to the selected value.
    50    - ''actionname''`.set_resolution` may optionally be set to a comma delimited list or a single value.
    51 {{{
    52 Example:
    53 
     66- **del_owner** -- Clear the owner field.
     67- **set_owner** -- Sets the owner to the selected or entered owner. Defaults to the current user. When `[ticket] restrict_owner = true`, the select will be populated with users that have `TICKET_MODIFY` permission and an authenticated session.
     68 - ''actionname''`.set_owner` may optionally be set to a comma delimited list of users that will be used to populate the select, or a single user. Groups and permissions may also be included in the list //(Since 1.1.3)//. When groups or permissions are specified the select is populated with all members of the group or all users that possess the permission.
     69- **set_owner_to_self** -- Sets the owner to the logged in user.
     70- **may_set_owner** -- Sets the owner to the selected or entered owner. Defaults to the existing owner. //(Since 1.1.2)//.
     71- **del_resolution** -- Clears the resolution field.
     72- **set_resolution** -- Sets the resolution to the selected value.
     73 - ''actionname''`.set_resolution` may optionally be set to a comma delimited list or a single value. Example:
     74 {{{#!ini
    5475resolve_new = new -> closed
    55 resolve_new.name = resolve
     76resolve_new.label = resolve
    5677resolve_new.operations = set_resolution
    5778resolve_new.permissions = TICKET_MODIFY
    5879resolve_new.set_resolution = invalid,wontfix
    5980}}}
    60  - leave_status -- Displays "leave as <current status>" and makes no change to the ticket.
    61 '''Note:''' Specifying conflicting operations (such as `set_owner` and `del_owner`) has unspecified results.
    62 
    63 {{{
     81- **leave_status** -- Displays "leave as <current status>" and makes no change to the ticket.
     82- **reset_workflow** -- Resets the status of tickets that are in states no longer defined.
     83'''Note:''' Specifying conflicting operations, such as `set_owner` and `del_owner`, has unspecified results.
     84
     85In this example, we see the `.label` attribute used. The action here is `resolve_accepted`, but it will be presented to the user as `resolve`:
     86
     87{{{#!ini
    6488resolve_accepted = accepted -> closed
    65 resolve_accepted.name = resolve
     89resolve_accepted.label = resolve
    6690resolve_accepted.permissions = TICKET_MODIFY
    6791resolve_accepted.operations = set_resolution
    6892}}}
    6993
    70 In this example, we see the `.name` attribute used.  The action here is `resolve_accepted`, but it will be presented to the user as `resolve`.
    71 
    72 For actions that should be available in all states, `*` may be used in place of the state.  The obvious example is the `leave` action:
    73 {{{
     94In this example, we see the `.label` attribute used.  The action here is `resolve_accepted`, but it will be presented to the user as `resolve`. The `.label` attribute is new in Trac 1.1.3 and is functionally the same as the `.name` attribute, which is now deprecated. If neither `.label` or `.name` is specified, the action will be presented to the user as //resolve accepted//, the underscores having been replaced by whitespace (//Since 1.1.3//).
     95
     96For actions that should be available in all states, `*` may be used in place of the state. The obvious example is the `leave` action:
     97{{{#!ini
    7498leave = * -> *
    7599leave.operations = leave_status
    76100leave.default = 1
    77101}}}
    78 This also shows the use of the `.default` attribute.  This value is expected to be an integer, and the order in which the actions are displayed is determined by this value.  The action with the highest `.default` value is listed first, and is selected by default.  The rest of the actions are listed in order of decreasing `.default` values.
    79 If not specified for an action, `.default` is 0.  The value may be negative.
    80 
    81 There are a couple of hard-coded constraints to the workflow.  In particular, tickets are created with status `new`, and tickets are expected to have a `closed` state.  Further, the default reports/queries treat any state other than `closed` as an open state.
    82 
    83 While creating or modifying a ticket workfow, `contrib/workflow/workflow_parser.py` may be useful.  It can create `.dot` files that [http://www.graphviz.org GraphViz] understands to provide a visual description of the workflow.
    84 
    85 This can be done as follows (your install path may be different).
    86 {{{
     102
     103This also shows the use of the `.default` attribute. This value is expected to be an integer, and the order in which the actions are displayed is determined by this value. The action with the highest `.default` value is listed first, and is selected by default. The rest of the actions are listed in order of decreasing `.default` values.
     104If not specified for an action, `.default` is 0. The value may be negative.
     105
     106The ticket create actions are specified by a transition from the special `<none>` state. At least one create action must be available to the user in order for tickets to be created. The create actions defined in the default workflow are:
     107{{{#!ini
     108create = <none> -> new
     109create.default = 1
     110
     111create_and_assign = <none> -> assigned
     112create_and_assign.label = assign
     113create_and_assign.permissions = TICKET_MODIFY
     114create_and_assign.operations = may_set_owner
     115}}}
     116
     117
     118There is one hard-coded constraints to the workflow: tickets are expected to have a `closed` state. The default reports/queries treat any state other than `closed` as an open state.
     119
     120The special `_reset` action is added by default for tickets that are in states that are no longer defined. This allows tickets to be individually "repaired" after the workflow is changed, although it's recommended that the administrator perform the action by batch modifying the affected tickets. By default the `_reset` action is available to users with the `TICKET_ADMIN` permission and reset tickets are put in the //new// state. The default `_reset` action is equivalent to the following `[ticket-workflow]` action definition:
     121
     122{{{#!ini
     123_reset = -> new
     124_reset.label = reset
     125_reset.operations = reset_workflow
     126_reset.permissions = TICKET_ADMIN
     127_reset.default = 0
     128}}}
     129
     130Since [trac:milestone:1.0.3] the `_reset` action can be customized by redefining the implicit action. For example, to allow anyone with `TICKET_MODIFY` to perform the `_reset` action, the workflow action would need to be defined:
     131
     132{{{#!ini
     133_reset = -> new
     134_reset.label = reset
     135_reset.operations = reset_workflow
     136_reset.permissions = TICKET_MODIFY
     137_reset.default = 0
     138}}}
     139
     140== Workflow Visualization
     141
     142Workflows can be visualized by rendering them on the wiki using the [WikiMacros#Workflow-macro Workflow macro].
     143
     144Workflows can also be visualized using the `contrib/workflow/workflow_parser.py` script. The script outputs `.dot` files that [http://www.graphviz.org GraphViz] understands. The script can be used as follows (your install path may be different):
     145
     146{{{#!sh
    87147cd /var/local/trac_devel/contrib/workflow/
    88148sudo ./showworkflow /srv/trac/PlannerSuite/conf/trac.ini
    89149}}}
    90 And then open up the resulting `trac.pdf` file created by the script (it will be in the same directory as the `trac.ini` file).
    91 
    92 After you have changed a workflow, you need to restart apache for the changes to take effect. This is important, because the changes will still show up when you run your script, but all the old workflow steps will still be there until the server is restarted.
    93 
    94 == Example: Adding optional Testing with Workflow ==
    95 
    96 By adding the following to your [ticket-workflow] section of trac.ini you get optional testing.  When the ticket is in new, accepted or needs_work status you can choose to submit it for testing.  When it's in the testing status the user gets the option to reject it and send it back to needs_work, or pass the testing and send it along to closed.  If they accept it then it gets automatically marked as closed and the resolution is set to fixed. Since all the old work flow remains, a ticket can skip this entire section.
    97 
    98 {{{
    99 testing = new,accepted,needs_work -> testing
    100 testing.name = Submit to reporter for testing
     150And then open up the resulting `trac.pdf` file created by the script. It will be in the same directory as the `trac.ini` file.
     151
     152After you have changed a workflow, you need to restart your webserver for the changes to take effect.
     153
     154== Example: Adding optional Testing with Workflow
     155
     156By adding the following to your [ticket-workflow] section of trac.ini you get optional testing. When the ticket has status `new`, `accepted` or `needs_work`, you can choose to submit it for testing.  When it's in the testing status the user gets the option to reject it and send it back to `needs_work`, or pass the testing and send it along to `closed`. If they accept it, then it is automatically marked as `closed` and the resolution is set to `fixed`. Since all the old work flow remains, a ticket can skip this entire section.
     157
     158{{{#!ini
     159testing = new,accepted,needs_work,assigned,reopened -> testing
     160testing.label = Submit to reporter for testing
    101161testing.permissions = TICKET_MODIFY
    102162
    103163reject = testing -> needs_work
    104 reject.name = Failed testing, return to developer
     164reject.label = Failed testing, return to developer
    105165
    106166pass = testing -> closed
    107 pass.name = Passes Testing
     167pass.label = Passes Testing
    108168pass.operations = set_resolution
    109169pass.set_resolution = fixed
    110170}}}
    111171
    112 == Example: Limit the resolution options for a new ticket ==
    113 
    114 The above resolve_new operation allows you to set the possible resolutions for a new ticket.  By modifying the existing resolve action and removing the new status from before the `->` we then get two resolve actions.  One with limited resolutions for new tickets, and then the regular one once a ticket is accepted.
    115 
    116 {{{
     172=== How to combine the `tracopt.ticket.commit_updater` with the testing workflow
     173
     174The [[trac:source:trunk/tracopt/ticket/commit_updater.py|tracopt.ticket.commit_updater]] is the optional component that [[TracRepositoryAdmin#trac-post-commit-hook|replaces the old trac-post-commit-hook]], in Trac 0.12.
     175
     176By default it reacts on some keywords found in changeset message logs like ''close'', ''fix'' etc. and performs the corresponding workflow action.
     177
     178If you have a more complex workflow, like the testing stage described above and you want the ''closes'' keyword to move the ticket to the ''testing'' status instead of the ''closed'' status, you need to adapt the code a bit.
     179
     180Have a look at the [[trac:wiki:0.11/TracWorkflow#How-ToCombineSVNtrac-post-commit-hookWithTestWorkflow|Trac 0.11 recipe]] for the `trac-post-commit-hook`, this will give you some ideas about how to modify the component.
     181
     182== Example: Add simple optional generic review state
     183
     184Sometimes Trac is used in situations where "testing" can mean different things to different people so you may want to create an optional workflow state that is between the default workflow's `assigned` and `closed` states, but does not impose implementation-specific details. The only new state you need to add for this is a `reviewing` state. A ticket may then be "submitted for review" from any state that it can be reassigned. If a review passes, you can re-use the `resolve` action to close the ticket, and if it fails you can re-use the `reassign` action to push it back into the normal workflow.
     185
     186The new `reviewing` state along with its associated `review` action looks like this:
     187
     188{{{#!ini
     189review = new,assigned,reopened -> reviewing
     190review.operations = set_owner
     191review.permissions = TICKET_MODIFY
     192}}}
     193
     194Then, to integrate this with the default Trac 0.11 workflow, you also need to add the `reviewing` state to the `accept` and `resolve` actions:
     195
     196{{{#!ini
     197accept = new,reviewing -> assigned
     198[…]
     199resolve = new,assigned,reopened,reviewing -> closed
     200}}}
     201
     202Optionally, you can also add a new action that allows you to change the ticket's owner without moving the ticket out of the `reviewing` state. This enables you to reassign review work without pushing the ticket back to the `new` status:
     203
     204{{{#!ini
     205reassign_reviewing = reviewing -> *
     206reassign_reviewing.label = reassign review
     207reassign_reviewing.operations = set_owner
     208reassign_reviewing.permissions = TICKET_MODIFY
     209}}}
     210
     211The full `[ticket-workflow]` configuration will thus look like this:
     212
     213{{{#!ini
     214[ticket-workflow]
     215create = <none> -> new
     216create.default = 1
     217create_and_assign = <none> -> assigned
     218create_and_assign.label = assign
     219create_and_assign.permissions = TICKET_MODIFY
     220create_and_assign.operations = may_set_owner
     221accept = new,reviewing -> assigned
     222accept.operations = set_owner_to_self
     223accept.permissions = TICKET_MODIFY
     224leave = * -> *
     225leave.default = 1
     226leave.operations = leave_status
     227reassign = new,assigned,accepted,reopened -> assigned
     228reassign.operations = set_owner
     229reassign.permissions = TICKET_MODIFY
     230reopen = closed -> reopened
     231reopen.operations = del_resolution
     232reopen.permissions = TICKET_CREATE
     233resolve = new,assigned,reopened,reviewing -> closed
     234resolve.operations = set_resolution
     235resolve.permissions = TICKET_MODIFY
     236review = new,assigned,reopened -> reviewing
     237review.operations = set_owner
     238review.permissions = TICKET_MODIFY
     239reassign_reviewing = reviewing -> *
     240reassign_reviewing.operations = set_owner
     241reassign_reviewing.label = reassign review
     242reassign_reviewing.permissions = TICKET_MODIFY
     243}}}
     244
     245== Example: Limit the resolution options for a new ticket
     246
     247The above `resolve_new` operation allows you to set the possible resolutions for a new ticket. By modifying the existing resolve action and removing the new status from before the `->` we then get two resolve actions. One with limited resolutions for new tickets, and then the regular one once a ticket is accepted.
     248
     249{{{#!ini
    117250resolve_new = new -> closed
    118 resolve_new.name = resolve
     251resolve_new.label = resolve
    119252resolve_new.operations = set_resolution
    120253resolve_new.permissions = TICKET_MODIFY
     
    126259}}}
    127260
    128 == Advanced Ticket Workflow Customization ==
    129 
    130 If the customization above is not extensive enough for your needs, you can extend the workflow using plugins.  These plugins can provide additional operations for the workflow (like code_review), or implement side-effects for an action (such as triggering a build) that may not be merely simple state changes.  Look at [trac:source:trunk/sample-plugins/workflow sample-plugins/workflow] for a few simple examples to get started.
     261== Advanced Ticket Workflow Customization
     262
     263If the customizations above do not meet your needs, you can extend the workflow with plugins. Plugins can provide additional operations for the workflow, like code_review, or implement side-effects for an action, such as triggering a build, that may not be merely simple state changes. Look at [trac:source:trunk/sample-plugins/workflow sample-plugins/workflow] for a few examples to get started.
    131264
    132265But if even that is not enough, you can disable the !ConfigurableTicketWorkflow component and create a plugin that completely replaces it.
    133266
    134 == some ideas for next steps ==
    135 
    136 New enhancement ideas for the workflow system should be filed as enhancement tickets against the `ticket system` component.  If desired, add a single-line link to that ticket here.
    137 
    138 If you have a response to the comments below, create an enhancement ticket, and replace the description below with a link to the ticket.
    139 
    140  * the "operation" could be on the nodes, possible operations are:
    141    * '''preops''': automatic, before entering the state/activity
    142    * '''postops''': automatic, when leaving the state/activity
    143    * '''actions''': can be chosen by the owner in the list at the bottom, and/or drop-down/pop-up together with the default actions of leaving the node on one of the arrows.
    144 This appears to add complexity without adding functionality; please provide a detailed example where these additions allow something currently impossible to implement.
    145 
    146  * operations could be anything: sum up the time used for the activity, or just write some statistical fields like
    147 A workflow plugin can add an arbitrary workflow operation, so this is already possible.
    148 
    149  * set_actor should be an operation allowing to set the owner, e.g. as a "preop":
    150    * either to a role, a person
    151    * entered fix at define time, or at run time, e.g. out of a field, or select.
    152 This is either duplicating the existing `set_owner` operation, or needs to be clarified.
    153 
    154  * Actions should be selectable based on the ticket type (different Workflows for different tickets)
    155 This is becoming a frequent request, with clear usecases.  The closest the current implementation will allow is to have a plugin provide a `triage` action that sets the next state based on the ticket type, so a `new` ticket would move to `new_task`, `new_defect`, etc., and the workflow graph would separate at that point.
     267== Adding Workflow States to Milestone Progress Bars
     268
     269If you add additional states to your workflow, you may want to customize your milestone progress bars as well. See [TracIni#milestone-groups-section TracIni].
     270
     271== Ideas for next steps
     272
     273Enhancement ideas for the workflow system should be filed as enhancement tickets against the [trac:query:?status=assigned&status=new&status=reopened&keywords=~workflow&component=ticket+system ticket system] component.  You can also document ideas on the [trac:TracIdeas/TracWorkflow TracIdeas/TracWorkflow] page. Also look at the [http://trac-hacks.org/wiki/AdvancedTicketWorkflowPlugin AdvancedTicketWorkflowPlugin] as it provides experimental operations.